Engineering Drawing Pdf 1st Year Notes & PPTs – EDP Notes | Free Lecture Notes download

4.4
(57)

Engineering Drawing Pdf 1st Year Notes & PPTs – EDP Pdf Notes

Engineering Drawing Pdf

In this Engineering Drawing 1st Year Notes Contents :-

  1. Scales
  2. Engineering Curves – I
  3. Engineering Curves – II
  4. Loci of Points
  5. Orthographic Projections – Basics
  6. Conversion of Pictorial View into Orthographic Views
  7. Projections of Points and Lines
  8. Projection of Planes
  9. Projection of Solids
  10. Sections & Development
  11. Intersection of Surfaces
  12. Isometric Projections
  13. Exercise
  14. Solutions – Applications of Lines.

Engineering-Drawing-Part-1

Download ED Notes – 1 

 

Engineering-Drawing-Part-2

Download ED Notes – 2 

 

Engineering-Drawing-Part-3

Download ED Notes – 3 

 

Engineering-Drawing-Part-4

Download ED Notes – 4 

 

Engineering-Drawing-Part-5

Download ED Notes – 5 

 

Engineering-Drawing-Part-6

Download ED Notes – 6 

 

Engineering-Drawing-Part-7

Download ED Notes – 7 

Note : Please watch the video to know the best way to understand the ppt and its usage before you download the file.

Follow us on FB – Smartzworld

Please visit assignment help services provided by MyAssignmentLab.com if you need expert help with your engineering homework. Its team of helpers will do your project from scratch.

Frequently Asked Questions

Q1: What is a circle and its components while considering engineering drawing?

A1: A closed curve which has a center point and all the points on the curve are at the same distance from the center point. Major components of the circle include,

  • Diameter: The straight distance from a outside curved surface to the opposite outside curved surface through the center point
  • Radius: The distance between the center point and the outside curved surface is called radius. Half the diameter is called radius. It is used to set the compass when drawing a diameter
  • A central angle: An angle formed by two radial line from the center of the circle
  • Sector: Area of a circle lying between two radial lines and the circumference
  • Quadrant: A sector with a central angle of 90 degree and with one of the radial lines oriented horizontally
  • Chord: A straight line whose opposite ends terminate on the circle
  • Segment: Smaller portion of the circle which is separated by the chord
  • Concentric circles: Two or more circles with a same center point
  • Eccentric circles: Two or more circle with out a common or same center point
  • Semi circle: Half of a circle

Q2: What is multi view projections?

A2: Primary means of graphic communication which is used in engineering work is called multi view orthographic projection. To convey ideas, shapes, dimension, procedures, for the manufacture or the construction, drawings are used in engineering. Orthographic projection is the basis of all descriptive geometry procedures. Where as, mutli view projection is a procedure that can be used to completely describe an object’s dimension or shape using two or more (multi) views that are normally projected at 90 degree to each other or at any other specified angles. Engineering work is completely based on this method of projection. Final design is then reproduced and sent to the job site or the shop.

Q3: What are the two fundamental methods of shape representation used in engineering drawing?

A3: Theory of projection is the base for the background information necessary to shape representation in graphics. There are two fundamental methods of shape representation given below

  1. Orthographic view: This view consists of two or more separate views of an object which has been taken from different directions, generally at right angles to each other and arranged relative in a definite way to each other. Each view shows the shape of an object for a particular view direction and collectively the views describe the given object completely.
  2. Pictorial view: For this view either oblique projection or perspective projection is used in which the object is oriented behind and projected up on a single plane.

Q4: What are the four principal types of projection?

A4: Four principal type of projection are,

  • Multi view projection
  • Axonometric projection
  • Oblique projection
  • Perspective projection

Q5: What are the classification of axonometric projections?

A5: Different classification of axonometric projections are

  • Isometric projection
  • Dimetric projection
  • Trimetric projection

Q6: What are the different multisection views?

A6: Different kinds of multi section used today are,

  • Full section
  • Offset section
  • Half section
  • Broken our section
  • Revolved section
  • Auxillary section

Q7: What are the classification of lines in orthographic projection?

A7: Classification of lines in orthographic projection is based on parallelism, direction, and type

Classification based on parallelism

  • A horizontal line
  • A frontal line
  • A profile line

Classification based on direction

  • Vertical line
  • Level line
  • Inclined line

Classification based on type

  • Oblique
  • Foreshortened
  • Point view
  • True length

Q8: What is the purpose of dimensioning and what are the guidelines?

A8: To provide a clear and complete description of an object is the main purpose of dimensioning. A pure, complete set of dimension permits only one interpretation needed to construct the part. The process of dimensioning should follow the below guidelines

  • Accuracy
  • Clearness
  • Completeness
  • Readability

Q9: What are the examples of engineering drawing?

A9:

Example of engineering drawing

 

 

How useful was this post?

Click on a star to rate it!

Average rating 4.4 / 5. Vote count: 57

No votes so far! Be the first to rate this post.

Leave a Reply

Your email address will not be published. Required fields are marked *