Switching theory and logic design Notes (STLD)

Switching theory and logic design Notes

Switching theory and logic design Notes – STLD Pdf Notes – STLD Notes

According to New Syllabus of R13

Copy -1


Download STLD Notes 1

Copy -2

Stld-1unit – part -1

Download STLD Unit 1-1

Stld-1unit2 -part -2

Download STLD Unit 1-2

Stld-2unit –

Copy -1

Download STLD Unit 2-1 

Copy -2

Download STLD Unit 2-2

Stld-3unit –

Copy -1

Download STLD Unit 3-1

Copy -2

Download STLD Unit 3-2


Copy -1

Download STLD Unit 4-1


NUMBER SYSTEMS & CODES : Philosophy of number systems – complement representation of negative numbers-binary arithmetic-binary codes-error detecting & error correcting codes –hamming codes.

Download STLD Unit 1


BOOLEAN ALGEBRA AND SWITCHING FUNCTIONS : Fundamental postulates of Boolean Algebra – Basic theorems and properties – switching functions–Canonical and Standard forms-Algebraic simplification digital logic gates, properties of XOR gates –universal gates-Multilevel NAND/NOR realizations.

Download STLD Unit 2


MINIMIZATION OF SWITCHING FUNCTIONS : Map method, Prime implicants, Don’t care combinations, Minimal SOP and POS forms, Tabular Method, Prime –Implicant chart, simplification rules.

Download STLD Unit 3


COMBINATIONAL LOGIC DESIGN Design using conventional logic gates, Encoder, Decoder, Multiplexer, De-Multiplexer, Modular design using IC chips, MUX Realization of switching functions Parity bit generator, Code-converters, Hazards and hazard free realizations.

Download  STLD Unit 4

UNIT V – Switching theory and logic design Notes

PROGRAMMABLE LOGIC DEVICES, THRESHOLD LOGIC : Basic PLD’s-ROM, PROM, PLA, PLD Realization of Switching functions using PLD’s. Capabilities and limitations of Threshold gate, Synthesis of Threshold functions, Multigate Synthesis.

UNIT VI – Switching theory and logic design Notes

SEQUENTIAL CIRCUITS – I : Classification of sequential circuits (Synchronous, Asynchronous, Pulse mode, Level mode with examples) Basic flip-flops-Triggering and excitation tables. Steps in synchronous sequential circuit design. Design of modulo-N Ring & Shift counters, Serial binary adder,sequence detector.

UNIT VII – Switching theory and logic design Notes

SEQUENTIAL CIRCUITS – II : Finite state machine-capabilities and limitations, Mealy and Moore models-minimization of completely specified and incompletely specified sequential machines, Partition techniques and Merger chart methods-concept of minimal cover table.

Download STLD Unit 7

UNIT VIII – Switching theory and logic design Notes

ALGOROTHIMIC STATE MACHINES : Salient features of the ASM chart-Simple examples-System design using data path and control subsystems-control implementations-examples of Weighing machine and Binary multiplier.

Download STLD Unit 8

TEXTBOOKS : Switching theory and logic design Notes – STLD Pdf Notes – STLD Notes

  1. Switching & Finite Automata theory – Zvi Kohavi, TMH,2nd Edition.
  2. Digital Design – Morris Mano, PHI, 3rd Edition, 2006.
  3. Switching theory and logic design A.Anand Kumar .2008.PHI.

REFERENCES : Switching theory and logic design Notes – STLD Pdf Notes – STLD Notes

  1. An Engineering Approach To Digital Design – Fletcher, PHI. Digital Logic – Application and Design – John M. Yarbrough, Thomson.
  2. Fundamentals of Logic Design – Charles H. Roth, Thomson Publications, 5th Edition, 2004.
  3. Digital Logic Applications and Design – John M. Yarbrough, Thomson Publications, 2006.

Note :- These notes are according to the r09 Syllabus book of JNTUH.In R13 ,8-units of R09 syllabus are combined into 5-units in r13 syllabus.Click here to check all the JNTU Syllabus books 

Check Also

JNTUA B.Tech 4-2 Sem (R13) Regular Results April 2017 – Released

JNTUA B.Tech 4-2 Sem (R13)  Regular Results, April 2017 JNTUA B.tech 4-2 Results 2017: JNTU-Anantapur …

Leave a Reply

Your email address will not be published. Required fields are marked *